Filter
Top Products
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
Page 3SKU 95424, 95629
PLEASE NOTE
Models 95424 MIG/ARC WELDER and 95629 DUAL MIG WELDER have identi-
cal features except for the ARC option mode available in the 95424 MIG/ARC Welder.
The other features are the same, as shown in the Specifications chart below.
SPECIFICATIONS
Model 95424 MIG/ARC Welder 95629 Dual MIG Welder
Welding Current 30 ~ 250 A
Duty Cycle 100% @ 125 Amps / 30% @ 250 A
Power Consumption 230V / 60 Hz / Single Phase / 40 A
Open Voltage 16 - 36 V
Power Plug Type 3-Prong, 220 VAC, polarized, twist lock (not included) NEMA #L6-40 or equivalent
Power Cord Rating 8 AWG x 3C
Gas Inlet Size
1
/
4
” Diameter (Barbed Fitting)
Ground Cable 8’ 7” L with grounding clamp
Torch Power Cable 8’ 7” L including torch
Welding Wire Size 0.03” to 0.045”
Thermal Overload
Protection
Auto shutdown, indicator light, and restart after cool down
Wire Drive Assembly
Protection
If welding wire jams, auto shutdown, unit beeps, and wire automatically restarts
after jam remedied
Torch Tip Size 0.03”
Overall Dimensions 35-
1
/
2
” L X 14” W x 27-
1
/
4
” H
Wire Speed 1-10 Wire Speed Settings
Net Weight 124.6 lb. 122 lb.
Both products include: Wheel Kit, Grounding Head, Bottle Rack, Torches and two wire reels (without wire).
ARC Mode Features, 95424 Model Only
n/a
Electrode Holder Cable 8’ 7” L with electrode holder
Electrode Size 1/16” to 3/16” Diameter
Welding Current 30 ~ 200 Amps, AC Voltage
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper-
ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.