Filter
Top Products
RECOMMENDED ACCESSORmES
[AWARN NGI
Use only accessories recommend for this drill press.
Follow instructions that accompany accessories. Use of
improper accessories may cause hazards.
Visit your Sears Hardware Department or see the Sears
Power and hand Tool Catalog for the follow accessories:
Drill bits
Hold-Down Clamps
Drill press Vises
[ WARN NGJ
Use only acessories designed for this drift press to
avoid injury from thrown broken parts or workpieces.
Sears may recommend other accessories not listed in
this manual See your neraest Sears store or Power and
Hand Tool Catalog for other accessorie&
Do not use any accessory unless you have completely
read the instruction or operator's manual for that
accessory.
Slotted screwdriver
12 mm wrench
UNPACKING AND CHECKING CONTENTS
[AWARNmNG ]
If any part is missing or damaged, do not plug the drill
press in until the missing or damaged part is replaced,
and assembly is complete.
Carefully unpack the drift press and al! its parts, and
compare against the list below.
To protect the drill press from moisture, a protective
coating has been applied to the machined surfaces.
Remove this coating with a soft cloth moistened with
kerosene or WDo40.
[, ,WARNING J
To avoid fire or toxic reaction, never use gasoline,
naphtha, acetone, lacquer thinner or similar highly
volatile solvents to clean the dril! press.
ITEM DESCRIPTION QUANTITY
A. Head assembly 1
B. Base 1
C. Table assembly 1
D. Column assembly 1
E. Rack ring assembly 1
F. Rack 1
G. Feed handles 3
H. Worm gear 1
L Crank handle 1
J. Lock handle 1
K. Hex bolts 4
h Fence assembly 1
M. Triangle knobs 2
N. Wing nuts 2
O. Washers 4
P. 3mm & 4 mm Hex keys 2
Q. Chuck key 1
R. Chuck 1
S. Batteries 2
Adjustable wrenches