Filter
Top Products
Toadjust(horizontally):
[] Removethebladeguardassemblyandanti-kickback
pawls.
[] Raisethebladeto itsfullheight.
[] Insertthehexkeythroughtheslotonthebackofthe
saw.Twoadjustmentscrewscanbeaccessedthrough
theslot.
[] Turntheadjustmentscrewsto repositionthespreader/
rivingknifeleftorrightasneededto alignthespreader/
rivingknifewiththesawblade.
[] Onceproperlyaligned,securelyretightenthescrews.
To adjust (vertically):
[] Push either side of the riving knife to align ittop
to bottom with the blade. Check its position after
adjustment to ensure that it is vertically aligned with
the blade.
PUSH STICK STORAGE
See Figure 19.
[] Insert the push stick storage screws from the loose
parts bag into the holes on the side of the saw table.
Use a Phillips head screwdriver to tighten screws
securely.
[] Place the slots in the push stick over the screws and
slide the push stick toward the back of the saw.
PUSHSTICKSTORAGE
SCREW(S)
BLADE
HORIZONTALADJUSTMENT
1
I
SPREADER/
RiViNG KNIFE
PUSHSTICK
Fig. 19
VERTICALADJUSTMENT
BLADE
FRAMING
SQUARE
I
SPREADER/
RiViNG KNIFE
Fig. 18
22