Filter
Top Products
17 - ENG
A13567
MAINTENANCE
Customer Responsibilities
Daily
or after
each
use
Before
each
use
●
●
●
●
Every
8
hours
Every
40
hours
Every
100
hours
Yearly
Every
160
hours
●
●
1
1- more frequent in dusty or humid conditions
Check Safety Valve
Drain Tank
Oil Leaks
Check Pump Oil
Change Pump Oil
Air Filter
NOTE: See "Operation"section for the location of controls.
To ensure effi cient operation and longer life of the air compressor outfi t, a
routine maintenance schedule should be prepared and followed. The following
routine maintenance schedule is geared to an outfi t in a normal working
environment operating on a daily basis. If necessary, the schedule should
be modifi ed to suit the conditions under which your compressor is used.
The modifi cations will depend upon the hours of operation and the working
environment. Compressor units in an extremely dirty and/or hostile environment
will require a greater frequency of all maintenance checks.
During maintenance, you could be exposed to compressed
air or moving parts. Personal injuries can occur. Before
doing any maintenance or repair, disconnect the spark plug wire to prevent
accidental starting, and relieve air tank pressure. Never operate the
compressor with the belt guard removed.
To Check Safety Valve
If the safety valve
does not work
properly, over-pressurization may
occur, causing air tank rupture or
an explosion.
●
●
●
●
Drive Belt -Condition
Motor Pulley/Flywheel alignment
Air compressor pump intake
and exhaust valves
Unusual Noise and/or Vibration
Consult the Engine Owners Manual for the man u fac tur er's recommendations
for any and all engine maintenance.
1. Before starting compressor, pull
the ring on the safety valve to
make sure that the safety valve
operates freely. If the valve
is stuck or does not operate
smoothly, it must be replaced
with the same type of valve.