Filter
Top Products
Click on “System Config” for advanced setting.
1. You can get all the information, Server
IP, Gateway, Net Mask & DNS, from your
ISP company.
2. Web Port : You can control the Video Web
server via this port.
3. Mac : The equipment’s physical address.
4. IP Type : This unit only supports Static
IP address, if you want to use Dynamic
IP, please obtain through a Router.
To set up the network setting of the
Video Web Server, check with your
network administrator or Internet
Service Provider.
NOTE :
Apply--
After all setting changes, press “apply” to
refresh the data in the Video Web Server.
Reboot--
Press this button to restart the Video Web
Server.
SYSTEM CONFIG
1. You can get all the data from the ISP
company or by mailing to the server
supplier.(POP3/SMTP server)
2. You should set the mail list which you
want to send to when the alarm is
triggered.
3. If it is not necessary for you to verify
password and user’s name, please
choose Verify as “No”.
4. Please refer to appendix#2 for more
details.
When the alarm is triggered, the Video Web
Server will capture the instant picture and e-mail
the captured image to the assigned recipients.
NETWORKNETWORK
MAILMAIL
ADVANCED SETTINGS
-29-