Filter
Top Products
Telnet Command Reference Guide V1.1
104
2.22.5 wl emi (for 2900 series)
This command allows you to wireless settings for emi.
wl emi [mode][ chan][ rate][ pream][ len][ modu][ ant][ loop][cca]
Syntax Description
mode It means to specify mode with the following number,
0: idle, 3: continue Rx, 4: continue
chan It means the channel number(1~13).
rate It means the data rate (110=11 Mbps, 540=54 Mbps)
pream (preamble) It means the preamble value, 1: short, 0: long.
len It means the data frame length.
modu It means to specify modulation, 0: disable, 1: enable.
ant It means to specify antenna_rx, 0, 1 or 2(diversity).
loop It means to enable or disable the power loop, 0: disable, 1: enable.
cca It means to specify cca mode, 0: disable, 1:ED, 2:CS.
Example
> wl emi 4 1 60 0 1514 0 0 1 0
% Your setting is:
% mode=4
% Channel=1
% rate=60
% preamble=0
% length=1514
% modulation=0
% antenna_rx=0
% power_loop=1
% ccamode=0