Filter
Top Products
Telnet Command Reference Guide V1.1
90
2.21.4 adsl ppp
This command can set the Internet Access mode for the router.
adsl ppp [ ? | pvc_no vci vpi Encap Proto modu acqIP idle [Username Password]
Syntax Description
pvc_no It means pvc number and must be between 0(Channel 1) to
7(Channel 8).
Encap 0 : VC_MUX,
1: LLC/SNAP,
2: LLC_Bridge,
3: LLC_Route,
4: VCMUX_Bridge,
5: VCMUX_Route.
Proto It means the protocol used to connect Internet.
0: PPPoA; 1: PPPoE; 2: MPoA.
Modu 0: T1.413, 1: G.Lite, 2: G.dmt, 4: Multi, 5: ADSL2, 8:ADSL2+.
acqIP It means the way to acquire IP address.
0 : fix_ip, 1: dhcp_client/PPPoE/PPPoA (acquire IP method)
idle -1: always on, else idle timeout. This parameter is used only for
PPPoE/PPPoA.
Username This parameter is used only for PPPoE/PPPoA.
Password This parameter is used only for PPPoE/PPPoA.
Reboot the system when you set it on Route mode.
Example
> adsl ppp o 35 8 1 1 4 1 -1 draytek draytek
pvc no.=0
vci=35
vpi=8
encap=LLC(1)
proto=PPPoE(1)
modu=MULTI(4)
AcquireIP: Dhcp_client(1)
Idle timeout:-1
Username=draytek
Password=draytek