Filter
Top Products
Telnet Command Reference Guide V1.1
91
2.21.5 adsl bridge (for 2700 series)
This command can specify a LAN port for mapping to certain PVC, and the mapping port/PVC
will be operated in bridge mode.
adsl bridge [pvc_no/status] [on/off/clear] [px ... ]
Syntax Description
pvc_no It means pvc number and must be between 0(Channel 1) to
7(Channel 8).
status It means to shown the whole bridge status.
on/off It means to turn on/off bridge mode for the specific channel.
clear It means to turn off all the PVC settings.
px It means the number of LAN port (x=2~4). Port 1 is locked for NAT.
Example
support pure bridge mode in PVC y and map it to lan port x (x=2~4).
status : show whole bridge status.
pvc_no : pvc number and it must be between 4(Channel-5) to 7(Channel-8)
on/off : turn on/off bridge mode for the specific channel.
clear : turn off and clear ports.
ex: adsl bridge 4 on p2 p3 p4
PVC 4 will map to lan port 2/3/4 in bridge mode.
> adsl bridge 4 on p2 p3
PVC Bridge p1 p2 p3 p4
----------------------------------
4 ON 0 1 1 0