Filter
Top Products
Telnet Command Reference Guide V1.1
51
2.14.1.14 srv dhcp public
This command allows users to configure DHCP server for second subnet.
srv dhcp public start [IP address]
srv dhcp public cnt [IP counts]
srv dhcp public status
srv dhcp public add [MAC Addr XX-XX-XX-XX-XX-XX]
srv dhcp public del [MAC Addr XX-XX-XX-XX-XX-XX/all/ALL]
Syntax Description
start It means the starting point of the IP address pool for the DHCP
server.
IP address It means to specify an IP address as the starting point in the IP
address pool.
cnt It means the IP count number.
IP counts It means to specify the number of IP addresses in the pool. The
maximum is 10.
status It means the execution result of this command.
add It means creating a list of hosts to be assigned.
MAC Addr It means to specify MAC Address of the host.
del It means removing the selected MAC address.