Telnet Command Reference Guide V1.1
116
-r <enable> It means to enable or disable VoIP to ISDN call (0: disable, 1:
enable).
-j <enable> It means to enable or disable On-Net PIN control (0: disable, 1:
enable).
-k <enable> It means to enable or disable Off-Net PIN control (0: disable, 1:
enable).
-b <code> It means to specify On-Net PIN code.
-e <code> It means to specify Off-Net PIN code.
-v [option] It means to view current settings
[…] It means that you can type in several commands in one line.
Example
> > voip sip ep 1 -w 1 -x 1
> voip sip ep -v
index : 1
dial out acc : 1
hot line enable : no
hot line url :
call fwd mode : 0
call fwd url :
call fwd timer : 30
call waiting : yes
call transfer : yes
CLIR enable : no [0]
dnd enable : no
dnd schedule : 0
dial tone on reg: no
t.38 fax relay : no
session timer : 3600 [no]
call route to : VoIP
alt. to ISDN : 0000
alt. to VoIP : 0000