Filter
Top Products
Telnet Command Reference Guide V1.1
32
2.6 p2p
This command allows users to block Peer-to-Peer file-sharing applications.
p2p [-a | -d | -s | -b P2P_P | -p P2P_P | -t]
Syntax Description
-a It means to activate the Peer-to-Peer blocking system.
-d It means to deactivate the Peer-to-Peer blocking system.
-s It means to view the configuration of Peer-to-Peer blocking system.
-b It means to enable blocking function for a specific protocol.
-p It means to disable blocking function for a specific protocol.
-t It means to set the time schedule that P2P applications will be
blocked.
P2P_P It means to specifies one or more of the following P2P protocol(s)
eDonkey: protocol of eDonkey and eMule applications
Upload: restrict upload of eDonkey and eMule applications only
FastTrack: protocol of KazaA, iMesh and Grokster applications
Gnutella: protocol of BearShare, Gnucleus and Limewire
applications
BitTorrent: protocol of BitTorrent application
Example
> p2p -s
Peer-to-Peer Blocking system: Deactived
eDonkey protocol blocking status: Disable
FastTrack protocol blocking status: Disable
Gnutella protocol blocking status: Disable
BitTorrent protocol blocking status: Disable
Time schedule: