Filter
Top Products
Telnet Command Reference Guide V1.1
66
2.16.10 mngt accesslist
This command allows you to specify that the system administrator can login from a specific
host or network. A maximum of three IPs/subnet masks is allowed.
mngt accesslist list
mngt accesslist add [index][ip addr][mask]
mngt accesslist remove [index]
mngt accesslist flush
Syntax Description
list It can display current setting for your reference.
add It means adding a new entry.
index It means to specify the number of the entry.
ip addr It means to specify an IP address.
mask It means to specify the subnet mask for the IP address.
remove It means to delete the selected item.
flush It means to remove all the settings in the access list.
Example
> mngt accesslist add 1 192.168.1.89 255.255.255.0
%% Set OK.