Epson DW073 Laser Level User Manual


 
18
English
Three Year Limited Warranty
DEWALT will repair, without charge, any defects due to faulty materi-
als or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair informa-
tion, visit www.dewalt.com or call 1-800-4-D
EWALT (1-800-433-9258).
This warranty does not apply to accessories or damage caused where
repairs have been made or attempted by others. This warranty gives
you specific legal rights and you may have other rights which vary in
certain states or provinces.
In addition to the warranty, D
EWALT tools are covered by our:
1 YEAR FREE SERVICE
D
EWALT will maintain the tool and replace worn parts caused by nor-
mal use, for free, any time during the first year after purchase.
2 YEARS FREE SERVICE ON
XRP
™ BATTERY PACKS
DC9096, DC9091 and DC9071
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
D
EWALT Power Tool, Laser, or Nailer for any reason, you can return
it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products sold in
Latin America. For products sold in Latin America, see country specif-
ic warranty information contained either in the packaging, call the local
company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
Troubleshooting Guide
This guide is intended to assist you in determining why the laser is not
operating to your expectations. These are some of the most com-
monly asked questions or observances. If you still have questions or
problems with your D
EWALT laser after completely reading through
this Troubleshooting Guide and instruction manual, call our toll free
Hot Line at 1-800-4-DEWALT or visit one of our service centers.
THE BATTERY WILL NOT LOCK IN PLACE
See “Installing the Battery Pack”
THE LASER WILL NOT TURN ON
Ensure that a fully charged battery is properly inserted into the tool.
TIP:
See “Installing the Battery Pack” section. Rotate the ON/OFF
VARIABLE SPEED Knob clockwise to turn the power on.
TIP:
See
“Control Panel” section. If the laser still doesn't turn on, take the tool
to a D
EWALT service center.