Filter
Top Products
Force Table (Use for Airstroke
®
actuator design)
Volume
Pounds Force
Assembly @ 100
Height PSIG @20 @40 @60 @80 @100
(in.) (in
3
) PSIG PSIG PSIG PSIG PSIG
18.0 1,274 1,100 2,220 3,420 4,670 5,980
16.0 1,134 1,290 2,640 4,000 5,410 6,840
14.0 987 1,330 2,730 4,130 5,590 7,030
12.0 841 1,330 2,710 4,170 5,590 7,010
10.0 693 1,380 2,790 4,270 5,730 7,240
8.0 533 1,500 3,060 4,670 6,280 7,950
Dynamic Characteristics at 15.0 in. Design Height
(Required for Airmount isolator design only)
Volume @ 100 PSIG = 1,060 in
3
Gage Spring
Pressure Load Rate
(PSIG) (lbs.) (lbs./in.)
40 2,720 395 71 1.19
60 4,110 541 68 1.13
80 5,560 707 67 1.12
100 7,000 852 65 1.09
Natural
Frequency
CPM HZ
20
18
16
14
12
10
8
6
4
2
0
MAX. HT.
10
9
8
7
6
5
4
3
2
1
0
MIN. HT.
22 20 18
BUMPER CONTACT
7.9 IN.
716 14 812 10
120 Psig
60 Psig
20 Psig
100 Psig
80 Psig
40 Psig
Volume
100 Psig
Do not use Airstroke in
shaded area without
consulting Firestone
CONSULT FIRESTONE
BEFORE USING AS
AIRMOUNT
RECOMMENDED
AIRMOUNT
DESIGN HEIGHT
15.0 INCHES
Static Data
4452
HEIGHT IN.
OPTIONAL
BUMPER
12.6 MAX O.D.
AT 100 PSIG
10.25 DIA.
3/8-16 BLIND NUTS
(5/8 DEEP)
1/4 OR 3/4 NPT
AIR INLET
6.20
2.88
7.88 DIA.
9.00 DIA.
1/2-13 THREADED HOLE
(3/4 DEEP)
(FOUR IN PISTON)
15-20 FT. LBS.
TORQUE
25-30 FT. LBS.
TORQUE
4.56
HEIGHT
NOTE: Bellows will not compress properly with less
than 10 PSIG internal pressure.
NOTE: A bead plate part is shown. This part is also
available with a bead ring. Bolts are not included.
See pages 8-10 for explanation.
See page 12 for instructions on how to use chart.
VOLUME (WITHOUT BUMPER) CU IN. x 100
FORCE LBS x 1000
Description
Assembly Order No.
Blind nuts, 1/4 NPT WO1-358-9079
Blind nuts, 1/4 NPT, bumper WO1-358-9096
Blind nuts, 3/4 NPT WO1-358-9089
Blind nuts, 3/4 NPT, bumper WO1-358-9088
Blind nuts, 3/4 NPT (piston
not included) WO1-358-0730
Assembly weight
(bead plate version, no bumper)
..... 15.7 lbs.
Style
1T15M-6
Two
Ply
Bellows
95
1T15M
-
6