Filter
Top Products
Remote DataTrak Operation
26 313526J
Prime Mode
See F
IG
. 20.
1. Press to enter Prime Mode screen. The Prime
symbol (PS) will appear in the display and the LED
(B, F
IG
. 16) will flash.
2. While in Prime Mode, the job total counter (JT) is
blank and will not count. However, the maintenance
counter (MC) will continue to decrement.
3. When a new drum is installed, press and hold
while in Prime Mode to reset the drum volume
remaining (DV) to the drum fill volume (DF).
4. To exit Prime Mode, press . The Prime symbol
will disappear and the LED will stop flashing; the
screen will return to Run Mode (F
IG
. 19).
5. To enter Setup Mode, press and hold for 3 sec-
onds.
Setup Mode
See F
IG
. 16. Press and hold for 3 seconds.
• If a password has not been assigned (set to ‘0000’),
the system will go directly to Setup screen 1.
Password Screen
If a password has been assigned (not set to ‘0000’), the
Password screen will appear (F
IG
. 21). Enter the pass-
word to access the Setup screens.
1. To enter a password, press to enter edit mode.
2. Once in edit mode, press to scroll through dig-
its.
3. Press to select the correct digit and move on to
the next.
4. When password is correct, press on the right-
most digit to submit the password.
Setup Screen 1
Use Setup screen 1 to set runaway cycle rate (RS),
enable/disable runaway protection (RT), select pump
volume per cycle (PV), select flow rate units (FR), enter
drum size (DS), and enter drum fill volume (DF). See
F
IG
. 22.
1. Press to toggle from field to field through the
screen.
2. Press to scroll through available values for each
field.
3. Press again to set the value and move the cur-
sor to the next data field.
F
IG
. 20: Prime Mode Screen
If a key is not pressed within one minute of entering
a setup screen, the system will return to Run Mode
(F
IG
. 19).
JT
MC
PS
F
IG
. 21: Password Screen
If you go past a field you want to edit, toggle
through the remaining fields, exit the Setup mode,
and reenter Setup. It is impossible to back up in the
Setup screens.