Filter
Top Products
Remote DataTrak Operation
313526J 33
*LED (B, page 24) will flash a code, pause, then repeat.
Table 4: Diagnostic Codes
Symbol
Code
No. Code Name Diagnosis Cause
LED
Flash
Code*
Accessory
Light
Tower
Code
Runaway Pump running faster than set
runaway limit.
• Increased air pressure.
• Increased fluid output.
• Exhausted fluid supply.
2Red Solid
E1 Diving Up Leak during upstroke. Worn piston valve or
packings.
7Yellow
Solid
E2 Diving Down Leak during downstroke. Worn intake valve or
priming rod seal.
6Yellow
Solid
E4 Disconnected
Solenoid
Solenoid is disconnected. • Solenoid unplugged.
• Damaged solenoid
wires.
3Red Solid
E7 Drum Empty Drum empty sensor has
tripped.
Replace empty drum with
full drum to clear.
4Red Solid
E7 Drum Low Drum low sensor has tripped. Replace empty drum with
full drum to clear.
4 Red
Flashing
E5 Reed Switch The air motor has seen
multiple up strokes without a
down stroke, or vice versa.
Damaged or disconnected
reed switches.
8Yellow
Solid
Maintenance
Counter
Expired
Maintenance Counter has
counted down to 0 from
setpoint.
Number of
cycles/gallons/liters
specified by setpoint have
passed since last reset.
5Yellow
Flashing