Gun Setup
•
The floor of the spray area:
must be electrically
conductive and grounded. Do not cover the floor
with cardboard or any non-conductive material
which would interrupt grounding continuity
•
Flammable liquids in the spray area:
must be kept
in approved, grounded containers. Do not use
plastic containers. Do not store more than the
quantity needed for one shift.
•
All persons entering the spray area:
must wear
shoes having conductive soles such as leather,
or wear personal grounding straps. Do not
wear shoes with non-conductive soles such as
rubber or plastic. If gloves are necessary, wear
the conductive gloves supplied with the gun. If
non-Graco gloves are worn, cut off fingers or palm
area of gloves to ensure your hand contacts the
grounded gun handle.
Key to Figs
. 12–15
Fig. 12
Operator is grounded through the
gun handle and conductive shoes.
Fig. 13
Object being sprayed is grounded
through contact with the hanger
and conveyor system.
Fig. 14
Gun is gr
ounded through the
conduct
ive air hose.
Fig. 15 Fluid supply line and source must
be grounded.
2
2
3A2495C