Filter
Top Products
Spray Tip Select
ion Chart
AEF Fine Finis
h Pre-Orifice Spray
Tips
Recommended f
or high finish quality applications at low and medium pressures. AEF tips have a pre-orifice
that assists
in atomizing sheer thinning materials, including lacquers.
Order desired tip, Part No. AEFxxx, where xxx = 3–digit number from the matrix below.
Fluid Output
fl oz/min (l/min)
Maximum Pattern Width at 12 in. (305 mm)
in. (mm)
6-8 (150-
200)
8-10
(200-250)
10-12
(250-300)
12-14
(300-350)
14-16
(350-400)
16-18
(400-450)
Orifice
Size
in. (mm)
at 600 psi
(4.1 MPa,
41 bar)
at 1000
psi (7.0
MPa, 70
bar) Spray Tip
†0.010
(0.254)
9.5 (0.28
)
12.5
(0.37)
310 410 510 610 710
0.012
(0.305)
12.0
(0.35)
16.0
(0.47)
312 412 512 612 712 812
0.014
(0.356)
16.0
(0.47)
21.0
(0.62)
314 414 514 614 714 814
0.016
(0.406)
20.0
(0.59)
26.5
(0.78)
416 516 616 716
* Tips are tested in water.
Fluid output (Q) at other pressures (P) can be calculated by this formula: Q = (0.041) (QT) where QT =
fluid output (fl oz/min) at 600 psi from the above table for the selected orificesize.
† These tip sizes include a 150 mesh filter.
3A2495C 63