Filter
Top Products
40 308018
Accessories
Use Only Genuine Graco Parts and Accessories
FLUID LINE ACCESSORIES
Fluid Hose Assemblies (Nylon)
225 psi (14 bar, 1.4 MPa) Maximum Working Pressure
FM Approved; 1/4 in. (6.35 mm) ID, 3/8 npsm(fbe)
215637 25 ft (8 m)
215638 50 ft (15 m)
Fluid Hose Assemblies (Nylon)
500 psi (35 bar, 3.5 MPa) Maximum Working Pressure
FM Approved; 1/4 in. (6.35 mm) ID, 3/8 npsm(fbe)
216076 25 ft (8 m)
216077 50 ft (15 m)
216079 100 ft (30 m)
Fluid Tube (PTFE) 185806
100 psi (7 bar, 0.7 MPa) Maximum Working Pressure
For reducing flushing time. Replaces item 12 in parts
list. 0.078 in. (1.98 mm) ID, 0.375 in. (9.53 mm) OD,
5.50 in. (139 mm) long
Fluid Shutoff/Drain Valve
500 psi (35 bar, 3.5 MPa) Maximum Working Pressure
For turning fluid off or on to the gun and for relieving
fluid line pressure at the pump
208630 1/2 npt(m) x 3/8 npt(f); carbon steel and
PTFE; for non-corrosive fluids
MISCELLANEOUS ACCESSORIES
Snap Ring Pliers 110090
For removing the ES ON-OFF Valve Retaining Ring
(item 47 in Parts List).
Paint Resistance Meter 722886
Used with 722860 Paint Probe to measure resistance
of paint. Not for use in Hazardous areas.
Paint Probe 722860
Used with 722886 Paint Resistance Meter to measure
resistance of paint. Not for use in Hazardous areas.
Grounding Clamp and Wire 222011
12 ga, 25 ft (7.6 m) wire
Safety Warning Signs
FM Approved; Available at no charge from Graco.
Must be ordered separately.
180060 Warning Sign (English)
Megohmmeter 241079
500 Volt output; 0.01–2000 megohms.
Not for use in Hazardous areas.
TI0377
ES ON/OFF Valve Conversion Kit 223976
Converts the ES ON/OFF Valve to a constant on
setting. A ball valve is included for complete air shut-
off at the gun.
Push-Pull Pattern Adjustment Valve 224883
Pattern adjustment valve that allows quick adjustment
of the pattern width between two adjustable settings.