Filter
Top Products
32 308-084
ACCESSORIES
Accessories
must be purchased separately
.
Use only
GENUINE GRACO PARTS AND ACCESSORIES.
AIR AND FLUID LINE ACCESSORIES
Air Pilot Paint Regulator 224–531
For controlling paint flow through the spray gun.
Connects
to mount assembly 235–094.
0331
Grounded Air Supply Hose
100
psi (7 bar) MAXIMUM WORKING PRESSURE
0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) LH;
Color coded black
PAR
T NO.
LENGTH
220–444 6 ft (1.8 m)
218–100 15 ft (5 m)
218–101 25 ft (8 m)
218–102
36 ft (1
1 m)
218–103 50 ft (15 m)
220–119 75 ft (23 m)
220–120
100 ft (30.5 m)
Grounded Air Supply Hose
100
psi (7 bar) MAXIMUM WORKING PRESSURE
0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) LH;
Color coded gray; More flexible than black hose
PAR
T NO.
LENGTH
223–068 6 ft (1.8 m)
223–069 15 ft (5 m)
223–070 25 ft (8 m)
223–071
36 ft (1
1 m)
223–072 50 ft (15 m)
223–073 75 ft (23 m)
223–074
100 ft (30.5 m)
Grounded Air Supply Hose
100
psi (7 bar) MAXIMUM WORKING PRESSURE
0.315 in. (8 mm) ID; 1/4 npsm(f) x 1/4 npsm(f) LH;
Color coded red; Stainless steel braid ground path
PAR
T NO.
LENGTH
235–068 6 ft (1.8 m)
235–069 15 ft (5 m)
235–070 25 ft (8 m)
235–071
36 ft (1
1 m)
235–072 50 ft (15 m)
235–073 75 ft (23 m)
235–074
100 ft (30.5 m)
Air Adapter Nipple 185–493
For connecting two or more grounded gun air supply
hoses.
1/4 npt x 1/4 npsm
(left hand thread)
Air Filter & Moisture Separator 106–148
250
psi (17.5 bar) MAXIMUM WORKING PRESSURE
For cleaning and drying air in air spray
system. 20 micron element, 5 oz. bowl
capacity
, 3/8 npt(f) inlet and outlet
High
V
olume Air Regulator 206–199
0–125
psi (0–9 bar) Regulated Pressure
200 psi (14 bar) Steel Pressure Gauge
For regulating air to the gun.
1/2 npt(f) inlet and outlet
Air Shut-off Valve 224–754
150
psi (10 bar) MAXIMUM WORKING PRESSURE
For turning air to gun off or on.
1/4 npsm(m) LH x 1/4 npsm(f) LH
Bleed-type Master Air Valve 107–141
300
psi (21 bar) MAXIMUM WORKING PRESSURE
Relieves air trapped in the air line between the paint
pump
air motor and this valve when closed. 3/4 npt
Filter (Air or Paint) 202–271
750
psi (52 bar) MAXIMUM WORKING PRESSURE
With 60 mesh (250 micron) element,
3/8 npt(f) inlet, 3/8 npt(m) outlet
Fluid Drain Valve
500
psi (35 bar) MAXIMUM WORKING PRESSURE
For relieving fluid line pressure
208–630 1/2 npt(m) x 3/8 npt(f); carbon steel and
PTFE;
for non-corrosive fluids
210–071 3/8
npt(m) x 3/8 npt(f); stainless steel
and
PTFE;
for corrosive fluids