Filter
Top Products
307-638 31
ACCESSORIES
FIL
TER (AIR OR P
AINT) 202–271
52 bar (750 psi)MAXIMUM WORKING PRESSURE
With 250 micron (60 mesh) element,
3/8 npt(f) inlet, 3/8 npt(m) outlet
SPRAY SYSTEM ACCESSORIES
218–118
ELECTROST
A
TIC SYSTEM
Includes items:
218–026
Manual Electrostatic Air Spray Gun
218–103
Grounded Air Supply Hose (See
page 30 for specifications)
216–077
Fluid Hose (See page 30 for
specifications)
106–148
Air Filter
218–123 ELECTROST
A
TIC SYSTEM
Includes items:
218–026
Manual Electrostatic Air Spray Gun
218–101
Grounded Air Supply Hose (See
and page 30 for specifications)
216–076
Fluid Hose (See page 30 for
specifications)
106–148
Air Filter
218–124 ELECTROST
A
TIC SYSTEM
Includes items:
218–026
Manual Electrostatic Air Spray Gun
218–102
Grounded Air Supply Hose (See
and page 30 for specifications)
216–077
Fluid Hose (See page 30 for
specifications)
106–148
Air Filter
PRO4000H GUN ELECTROST
A
TIC HIGH
CONDUCTIVITY KIT 222–029
For converting the PRO4000 Gun to spray conductive
(metallic) paints. Since there are so many variations in
paint
formulations, Graco recommends your specific ma
-
terial
be tested for useability with this gun.
NOTE:
The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
ISOLA
TION ST
AND 728–650
Required for isolating the fluid supply from the ground
when
spraying conductive water–base fluid.
CONDUCTIVE (W
A
TER BASE) HOSE KIT 221–008
For
converting gun to handle conductive (water base) flu
-
ids.
See instruction manual 307–639.
NOTE:
The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
WA
TER BASE P
ACKING KIT 220–014
For converting packings to handle water base fluids.
NOTE:
The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
WA
TER BASE CONTROL BOX 218–619
7 bar (100 psi) MAXIMUM WORKING PRESSURE
110–1
15 V
olt output; 50–60 Hz
Pneumatically
operated control box used in a water base
electrostatic system to automatically bleed the electro-
static charge from the water base fluid supply when the
gun
is released or the safety fence is open.
Must also order the following:
221–008 W
ater Base Conductive Hose Kit
728–650
Isolation Stand
CONDUCTIVE (SOL
VENT BASE) HOSE KIT
218–568
For converting gun to handle conductive (solvent base)
fluids.
See instruction manual 307–640.
NOTE:
The installation of this kit will void the CSA and
FM approval on the PRO4000 Gun.
MISCELLANEOUS ACCESSORIES
PAINT
RESIST
ANCE METER 722–886
Used
with
722–860 Paint Probe to measure resistance of
paint.
Not for use in Hazardous areas.
P
AINT PROBE 722–860
Used with 722–886 Paint Resistance Meter to
measure resistance of paint.
Not for use in
Hazardous areas.
MEGOHMMETER 218–979
500 V
olt output; 0.01–2000 megohms
GUN COVER 180–209
Order Part No. 218–374 for package of 10.