Filter
Top Products
-10- G1021 15" Planer
Unpacking
The bandsaw is shipped from the factory in a
carefully packed carton. If you find the machine to
be damaged after you’ve signed for delivery and
the truck and driver are already gone, you will
need to file a freight claim with the carrier. Save
the containers and all packing materials for
inspection by the carrier or their agent. Without
the packing materials, filing a freight claim can be
difficult. If you need advice regarding this situa-
tion, please call us immediately.
WARNING
The G1021 is a heavy machine with a 475 lb.
shipping weight. DO NOT over-exert your-
self while unpacking or moving your
machine – get assistance. In the event that
your planer must be moved up or down a
flight of stairs, be sure that the stairs are
capable of supporting the combined weight
of people and the machine. Failure to use
care while assembling or moving could
result in serious personal injury.
Parts Inventory
Now is a good time to inventory the fasteners
required for assembly:
Hardware Qty
Cap Screw 6mm - 1.0 x 12 3
Lock Washer 6mm 3
Hex Bolts 6mm - 1.0 x 12 3
Hex Nuts 6mm - 1.0 3
Washers 6mm 6
Knife Setting Jig Rod 1
Knife Setting Jig Brackets 2
E-clips 2
Allen
®
Wrench 3mm 1
Allen
®
Wrench 4mm 1
Allen
®
Wrench 5mm 1
Allen
®
Wrench 6mm 1
Open End Wrench 8-10mm 1
Open End Wrench 12-14mm 1
Handle 1
Hex Nut 10mm - 1.25 1
Flat Washer 10mm 1
Scale 1
Hex Bolts 8mm -1.25 x 20 6
Flat Washers 8mm 6
Setscrews 8mm - 1.25 x 12 6
Stand Hardware (Optional) Qty
Carriage Bolts
5
⁄
16" - 18 x
5
⁄
8"24
Hex Nuts
5
⁄
16" - 18 28
Flat Washers
5
⁄16"24
Hex Bolts
5
⁄16" - 18 x 2" 4
Fender Washers 8
In the event that any parts are missing, we will be
happy to replace them. Contact our Customer
Service number for assistance. If any non-propri-
etary parts such as nuts, bolts or washers are
missing, we will be happy to replace these too,
but for the sake of expediency, these items can
be obtained at your local hardware store.
Take a quick inventory of the parts and put them
aside for assembly later. After all the parts have
been removed from the container, you should
have:
• Planer Unit
• Dust Port
• Roller Extensions
• Hand Wheel
• Stand Top (Optional)
• Stand Legs (Optional)
• Stand Braces (Optional)
CAUTION
Some die-cut metal parts may have sharp
edges (called “flashing”) on them after they
are formed. Please examine the edges of
all die-cut metal parts before handling
them. Failure to do so could result in injury.