Filter
Top Products
G0636X 17" Ultimate Bandsaw
-11-
Inventory
The following is a description of the main compo-
nents shipped with your machine. Lay the compo
-
nents out to inventory them.
Note:
If you can't find an item on this list, check
the mounting location on the machine or examine
the packaging materials carefully
. Occasionally
we pre-install certain components for shipping
purposes.
Crate Contents (Figure
4): Qty
A. Bandsaw (not shown) .................................
1
B.
Cast Iron Fence Assembly ......................... 1
C. Resaw Fence .............................................
1
D. Guide Post Handwheel .............................. 1
E. Miter Gauge ................................................ 1
Hardware and Tools: Qty
• Eye Bolts M10-1.5 x 15 .............................. 2
• Fence Handle M8-1.25 x 20
(Fence) ........ 1
• Hex Nut
M8-1.25 (Fence) ........................... 1
• Resaw Fence Lock Handle
M8-1.25 x 44 (Resaw Fence) .....................
1
• Flat Washer M8-1.25 x 30 (Resaw Fence) 1
• Moving Plate (Resaw Fence) ..................... 1
• Open End Wrench 10 x 13mm ................... 1
• Open End Wrench 17 x 19mm ................... 1
• Hex Wrench 5mm & 6mm .....................1 Ea
• Cap Screw M6-1 x 25 (Handwheel) ........... 1
Figure 4. G0636 crate contents.
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
SUFFOCATION HAZARD!
Immediately discard all plas-
tic bags and packing materi
-
als to eliminate choking/suf
-
focation hazards for children
and animals.
B
C
D
E