Filter
Top Products
G0449/G0450 37" Drum Sander
-27-
Failure to routinely inspect your drum sander
for damage and wear could result in unsatis
-
factory work results, premature component
or machinery failure, or operator injury. We
recommend you create a checklist for routine
inspection and maintenance. Remember to
always disconnect the drum sander from its
power source before attempting to inspect,
adjust, or repair this machine!
2. Slide the gearbox out, remove the fill plug
(Figure 24), remove the drain plug, drain the
oil, and reinstall the drain plug.
Figure 25. Table lift screws.
3. Add new oil, then reinstall the fill plug.
Table Lift Screws: These should be lubricated
with lithium grease every six months.
Clean the table lift screws (Figure 25) and rub
lithium grease onto the threads. Move the table
up or down to spread the grease thoroughly over
the threads.
Figure 24. Lubricating gear box.
Drain Plug
Fill Plug
Worm Gear: Place a dab of lithium grease on the
worm gear threads (Figure 26) once a year.
Figure 26. Worm gear threads.