Filter
Top Products
G0460/G0461 12" Sliding Table Saw
-19-
Floor Load
Most commercial floors are suitable for this
machine. Residential floors may require additional
reinforcement to support the machine and opera
-
tor. Refer to the Machine Data Sheet on Page
3
for details about the weight and foot print size.
Placement
Consider existing and anticipated needs, size of
material to be processed through your machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your saw. See Figure 16 for the minimum operat
-
ing clearances of the Model G0460/G0461.
Site Considerations
Figure 16. Operating clearances.
Moving & Placing
Base Unit
To remove the saw base unit from the crate
pallet:
1. Remove the top of the crate and position the
forklift forks together and directly above the
saw.
2. Place two lifting straps (with hooks on the
ends) over the forks and slide the hooks into
the points shown in
Figure 17.
Figure 17. Lifting the saw base unit.
3. Lift the saw base unit and move it to your
predetermined location.
DO NOT lift the table saw any higher than
necessary to clear the floor. Serious per
-
sonal injury and damage to the machine
may occur if safe moving methods are not
followed.
Use lifting straps with a 1500 lbs. minimum
lifting capacity. If a lifting strap breaks, seri
-
ous personal injury may occur.