Filter
Top Products
-40-
G0460/G0461 12" Sliding Table Saw
G7984—Face Shield
H1298—Dust Sealed Safety Glasses
H1300—UV Blocking, Clear Safety Glasses
H2347—Uvex
®
Spitfire Safety Glasses
H0736—Shop Fox
®
Safety Glasses
Safety Glasses are essential to every shop. If
you already have a pair, buy extras for visitors
or employees. You can't be too careful when it
comes to shop safety!
Figure 70. Our most popular safety glasses.
G7984
H1298
H1300
H2347
H0736
H6460—12 Tooth Scoring Blade Set
The scoring blade set consists of an inner and
outer blade and four internal shims. Two shims
are 0.008" thick and two are 0.004". The shims
are provided so the scoring blade set can match
the kerf thickness of the main blade.
Figure 73. H6460 Scoring Blade Set.
Carbide-Tipped Saw Blades (ATB)
G4808—12" Ripping, 40T
G4809—12" General Purpose, 60T
G4810—12" Fine Finishing/Cabinet Work, 80T
These ATB blades are manufactured to close tol
-
erances and are fully balanced before leaving the
factory. All the carbide-tipped teeth are precisely
ground to give a smooth cut every time. The pat
-
tern of the teeth is alternate top bevel and the
saw kerf is approx.
1
⁄8". These blades have proven
themselves in thousands of cabinet shops around
the country. Manufactured for heavy-duty use.
Figure 72. Carbide-tipped saw blades.
Figure 71. Recommended products for protect-
ing unpainted cast iron/steel part on machinery.
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 oz Spray
G2871—Boeshiel
d
®
T-9 12 oz Spray
G2870—Boeshiel
d
®
T-9 4 oz Spray
H3788—G96
®
Gun Treatment 12 oz Spray
H3789—G96
®
Gun Treatment 4.5 oz Spray