Headstock, Gearbox, & Apron Oil
Reservoirs
Figures 77–80
NOTICE
When draining the headstock oil reservoir,
you must remove the V-belts and take care
to thoroughly remove any spilled oil from
the pulleys. If oil should get on the V-belts,
clean the oil from the pulleys and replace
the V-belts with a new set.
Figure 79.
Figure 80.
NOTICE
Drain and refill the headstock, gearbox, and
apron oil reservoirs after the first 40 hours
of operation to remove any sludge build-up
that may accumulate from initial operation.
Figure 77.
Figure 78.
