Filter
Top Products
G0560 Meat-Cutting Bandsaw -21-
Meat Grinder
The Model G0560 comes with a meat grinder.
Before assembling this for use, clean and sanitize
its parts. See Section 5: Sanitation for details on
sanitizing. Figure 28 shows the meat grinder
components.
Figure 28. Meat grinder components.
Figure 29. Keyway location.
Figure 30. Sausage stuffer attachment.
To install the meat grinder:
1. Disconnect the machine from the power
source!
2. Line up the fixed key on the meat grinder to
the keyway on the housing shown in Figure
29.
Keyway
The meat grinder comes with a sausage stuffer
attachment.
To install the sausage stuffer:
1. Remove the collar from the end of the meat
grinder housing.
2. Fit the collar over the sausage stuffer.
3. Place the collar back on the housing as
shown in Figure 30, and thread it tight so it
is secured to the housing.
The meat grinder should not be attached
to the saw when not in use. The open
chute and spinning auger easily invite an
accident if not being attended to.
The meat grinder should not be attached
to the saw when not in use. Meat fat is
required to lubricate the grinder compo-
nents during operation. Grinder will be
damaged if allowed to turn “dry”.
Sausage
Stuffer
Collar
3. Slide the meat grinder all the way into the
housing and tighten the split collar to secure
the grinder in place.