Filter
Top Products
-22-
G0592 Metal Cutting Bandsaw
Cutting Angle
The G0592 has a locking turret that can be adjust-
ed to 60° clockwise to 45° counterclockwise.
To change the angle:
1. Raise the bow to the highest position and
lock in place.
2. Flip the stop out as shown in Figure 19.
Figure 20. Swivel lock lever.
3. Loosen the swivel lock lever (Figure 20),
rotate the turret to the desired angle, then re-
tighten the swivel lock lever.
Figure 19. Stop.
Stop
4. To return to 0°, flip the stop up.
Note: Adjust the set screw on the stop to
calibrate the scale to the stop.
Swivel Lock Lever
Stop Set Screw