Filter
Top Products
-44-
G0605X/G0606X Extreme Series 12" Table Saw
Carbide-Tipped Saw Blades (ATB)
G4808—12" Ripping, 40T
G4809—12" General Purpose, 60T
G4810—12" Fine Finishing/Cabinet Work, 80T
These ATB blades are manufactured to close tol
-
erances and are fully balanced before leaving the
factory. All the carbide-tipped teeth are precisely
ground to give a smooth cut every time. The pat
-
tern of the teeth is alternate top bevel and the
saw kerf is approx.
1
⁄8". These blades have proven
themselves in thousands of cabinet shops around
the country. Manufactured for heavy-duty use.
Figure 63. Carbide-tipped saw blades.
Figure 61. Recommended products for
protecting your cast iron table top.
G5562—SLIPIT
®
1 Qt. Gel
G5563—SLIPIT
®
12 oz Spray
G2871—Boeshiel
d
®
T-9 12 oz Spray
G2870—Boeshiel
d
®
T-9 4 oz Spray
H3788—G96
®
Gun Treatment 12 oz Spray
H3789—G96
®
Gun Treatment 4.5 oz Spray
Figure 64. G2370 SHOP FOX
®
Board Buddies.
G2370—SHOP FOX
®
Board Buddies
These unique hold downs only turn in one
direction to prevent kickback. Adjustable height,
spring loaded wheels are designed to hold your
workpiece tight against the table and rip fence
and are made of a special composition that will
not mark your work.
Figure 62. Superbar™ and Master Plate.
G7581—Superbar™
G7582—Master Plate
The miter slot mounted Superbar™ will align, tune
and calibrate your tablesaw to within ±.001 in just
minutes. Replace your tablesaw blade when cali
-
brating the double disk ground Master Plate for a
precision measurement, with no runout!