Filter
Top Products
-10-
G0619 DELUXE SMALL MILL/DRILL
The Model G0619 was carefully packed when it
left our warehouse. If you discover the machine
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663
for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the con
-
dition of your shipment, you should inventory the
contents.
Wear safety glasses dur-
ing the entire set up pro
-
cess!
This machine presents
serious injury hazards
to untrained users. Read
through this entire manu
-
al to become familiar with
the controls and opera
-
tions before starting the
machine!
Unpacking
Setup Safety
SECTION 3: SET UP
The Model G0619 is a
heavy machine. DO NOT
over-exert yourself while
unpacking or moving
your machine—get assis
-
tance.
The following items are needed to complete the
setup process, but are not included with your
machine:
Description Qty
• Precision Level ........................................... 1
• Safety Glasses (for each person) ..............
1
• Solvent ....................................................... 1
• Shop Rags .................................................. 1
• Metal Shim Stock ....................................... 1
• Brass Hammer ...........................................
1
• Power Drill (optional) ..................................
1
• Drill Bit
9
⁄16" (optional) ................................. 1
• Hex Bolts M12-1.75 (length as needed) ....
4
• Flat Washers 12mm ...................................
8
• Lock Washers 12mm ................................. 4
• Hex Nuts M12-1.75 .................................... 4
• An Assistant ...............................................
1
Items Needed for
Setup