Filter
Top Products
G0619 DELUXE SMALL MILL/DRILL
-15-
Damage to your eyes, lungs, and ears could
result from using this machine without
proper protective gear. Always wear safety
glasses, a respirator, and hearing protection
when operating this machine.
Loose hair and cloth-
ing could get caught in
machinery and cause seri
-
ous personal injury. Keep
loose clothing and long
hair away from moving
machinery.
Operation Safety
SECTION 4: OPERATIONS
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC
-
OMMEND that you read books, trade maga
-
zines, or get formal training before begin
-
ning any projects. Regardless of the con
-
tent in this section, Grizzly Industrial will
not be held liable for accidents caused by
lack of training.
Figure 10. Spindle controls.
Spindle Height
Control
Quill Lock Lever
Spindle height is changed by unlocking the quill
lock and using the down feed handles or the fine
feed knob (Figure 10). The digital spindle height
readout indicates the spindle height.
To change the spindle position
:
1. Unlock the quill lock lever and loosen the fine
feed lock knob.
Tip: Use the comfort lever (Figure 10) for
additional leverage to unlock the fine feed
lock knob if the knob is too tight. Do not use
the comfort lever to tighten the knob.
2. Pull down on the quill feed levers to lower
or raise the spindle. Lock the quill lock to
hold the spindle in a particular position if you
choose.
Tip: Milling with the quill fully extended,
can cause tool chatter. For maximum spindle
rigidity when milling, it is better to keep the
spindle retracted into the headstock as far as
possible with the quill lock lever locked, and
the fine feed lock knob tightened.
Comfort Lever
Quill Feed Lever
Fine Feed Lock Knob
Spindle