Filter
Top Products
Model G0771 (Mfd. Since 8/15)
-55-
SECTION 7: MAINTENANCE
For optimum performance from your machine,
follow this maintenance schedule and refer to any
specific instructions given in this section.
Daily Check:
• Loose mounting bolts.
• Damaged saw blade.
• Worn or damaged wires.
• Any other unsafe condition.
Weekly Maintenance:
• Clean sliding table surface and grooves.
• Clean and protect cast iron table.
• Clean rip fence and slide ways.
Monthly Maintenance:
• Clean/vacuum dust buildup from inside cabi-
net and off motors.
• Check/replace belt for proper tension, dam-
age or wear (Page 68).
Every 6–12 Months:
• Lubricate trunnion slides (Page 56).
• Lubricate worm gear (Page 56).
• Lubricate leadscrew (Page 56).
Schedule
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Cleaning &
Protecting
Cleaning the saw is relatively easy. Vacuum
excess wood chips and sawdust, and wipe off the
remaining dust with a dry cloth. If any resin has
built up, use a resin-dissolving cleaner to remove
it.
Protect the unpainted cast iron table by wiping it
clean after every use—this ensures moisture from
wood dust does not remain on the bare metal
surface. Keep the table rust-free with regular
applications of products like G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9 (see Page 54 for more
details).