Filter
Top Products
3650 Portable O2 Analyzer - Installation 7 of 50
Operator Manual
ORBISPHERE
1 Installation
This section provides necessary information to install and connect the instrument.
Should you have any questions, do not hesitate to contact your Hach Ultra
representative regarding the installation procedure.
The ORBISPHERE 3650 instrument is a self-contained portable analyzer, configured to
make oxygen concentration measurements in gaseous or liquid samples, with
Electrochemical (EC) Sensors.
Refer to Table 8-1, “Instrument Configurations,” on page 43 for a complete list of the
3650 instrument configurations available.
Up to 500 measurement values can be stored in memory and downloaded to a personal
computer for further analysis.
Locate the instrument convenient to the sample being analyzed and to the PC if one is
being used. A 6-pin LEMO connector for RS-232 serial output to a PC, or an optional
external power source is located on the right side (as illustrated in Fig 1-1 on page 7).
Fig 1-1: ORBISPHERE 3650 Portable O
2
Analyzer