Filter
Top Products
3650 Portable O2 Analyzer - Options Setup 25 of 50
Operator Manual
ORBISPHERE
3.2 O
2
Analyzer - PC Connection
For the hardware connection of the analyzer to a PC, see “Instrument - PC Connection”
on page 10.
The Configuration, Serial port menu lets you choose one of four serial communication
ports, as follows:
3.3 Reviewing Instrument Configuration
To review if the analyzer is set up as expected, choose the Configuration,
Configuration view command. You will see a window like the one illustrated in Fig 3-8.
You may change a number of these settings using the WinLog97 program. The
modifiable settings, and information relating to these settings are listed in the next
section, “Configuring the Instrument” on page 26.
However, should you see any unexpected items listed on your screen which you are
unable to correct, please contact your Hach Ultra representative.
Usually, COM1 is used to connect to a mouse, so
try COM2 first. You may find that a separate SetUp
program supplied with your PC is necessary to
activate this port.
Click on OK to activate the selected port. If the port
you have selected here is adequate, the WinLog97
program will return to the main menu. Otherwise,
you will see an RS232 ERRORS message advising
you to select another port.
Fig 3-7: Serial Port Configuration
Fig 3-8: Instrument Configuration