Filter
Top Products
3650 Portable O2 Analyzer - Operating Information 19 of 50
Operator Manual
ORBISPHERE
• Sample (sequence number of the sample)
• Gas (concentration of the measured gas)
• Date (date of the measurement)
• Time (time of the measurement)
• Sample Description
In the example shown in Fig 2-2, the Sample Description column shows Tank 1 for the
first samples. These descriptions can be modified for your applications using the
procedures described below.
2.4.2 Altering the Sampling Point Descriptions
For help in identifying the locations of various sampling points that are stored by the
analyzer, you may choose the Sampling Point Description command from the Logger
menu to bring up the dialog box illustrated in Fig 2-3.
The measurement values to be placed in positions 0 through 499 (identified as Text 0,
Text 1... etc.) can be described however you wish. Double-click on a particular position
(or click Modify), then type a description in the box as shown (e.g. Tank 3). Choose OK
when finished entering a description.
When you Close this box, your modifications will be saved, and will appear in the
Sample Description column for the next downloaded list. These descriptions can be
modified again later as your requirements change.
2.4.3 Copying Values
To copy the results to the Windows Clipboard, so that the data can be pasted into a
spreadsheet, word processor or other Windows program that accepts tabular text
information, choose the Clipboard command from the Export menu.
Fig 2-3: Sampling Point Descriptions