Filter
Top Products
SKU 93380 For technical questions, please call 1-800-444-3353. Page 26
9. Never attempt to remove material stuck in the moving parts of the Table Saw
while it is plugged in and running.
10. Turn off the Table Saw if the workpiece is to be backed out of an uncompleted
cut.
11. When the cut is complete, depress the red “OFF” Button on the Power Switch
(137) to turn off the Table Saw. (See Figure X.)
12. Wait until the Saw Blade comes to a complete stop. Then, unplug the Power
Cord Plug (130) from its electrical outlet.
13. Remove the cut workpiece and debris from the Table Saw.
Basic Operation For Using The Miter Gauge Assembly:
1. WARNING! Always wear safety impact eye goggles and heavy work gloves
when using the Table Saw.
2. WARNING! When using the Miter Gauge assembly (200 thru 214), always
keep hands and fingers well away from the Saw Blade and cutting area.
KNOB
(200)
MITER GAUGE BODY
(202)
3. Set the Miter Gauge assembly (200 thru 214) on the Main Table (115) of the
Table Saw. (See Figure Y.)
FIGURE Y
POWER SWITCH
(137)
ON
OFF