Filter
Top Products
Page 27SKU 97009 For technical questions, please call 1-800-444-3353.
Remove the old oil from inside the Gear Box Assembly (201S) and replace the
oil using 140 weight gear oil (not included). The new oil should just come to the
edge of the Gear Box (202-1). Do not overll. (See Figure V.)
Replace the Gear Box Gasket, Gear Box Cover, and four Hex Socket Head
Screws. (See Figure V.)
•
•
GEAR BOX ASSY. (201S)
HEX SOCKET HEAD SCREWS
GEAR BOX COVER
&
GEAR BOX GASKET
FIGURE V
To replace the coolant: Remove the Hose (78) at the top of the Coolant
Tank (82). Then slide the Coolant Tank out from under the Stand (77S) of the
Bandsaw. (See Figure W.)
Fill the Coolant Tank to about 80% capacity with a clean, water-soluble coolant
(not included). (See Figure W.)
Slide the Coolant Tank (82) back under the Stand (77S) of the Bandsaw. Then
re-insert the Hose (78) through the top of the Coolant Tank. (See Figure W.)
IMPORTANT: The water-soluble coolant should be replaced as often as is
necessary to keep metal debris in the coolant from clogging the hoses.
4.
•
•
•
HOSE (78)
COOLANT TANK (82)
FIGURE W