Filter
Top Products
SKU 98198 For technical questions, please call 1-800-444-3353. Page 18
To adjust the rear Pressure Plate:5.
Disconnect the power cord from the a.
outlet.
b.
cap screws on both ends of the rear
of the Pressure Plate (84) to raise or
loosen to lower the plate.
Adjust until the rear of the Pressure c.
Plate (84) until it is at or up to 0.004”
lower than the drum.
To adjust the front of the Pressure
Plate:
Disconnect the Drum Sander.d.
e.
cap screws on both ends of the front
of the Pressure Plate to raise the
plate or loosen to lower.
Adjust until the front of the Pressure f.
Plate is up to 0.004" lower than the
drum.