Filter
Top Products
SKU 98198 For technical questions, please call 1-800-444-3353. Page 9
SPECIFICATIONS
Maximum Stock Width 18" (36” two passes)
Sanding Motor
Fan Cooled Induction
Motor
Stock Thickness Range
Electrical Requirements
Sanding Drum Speed 4,000 RPM
Dust Collection
fan
Conveyor Belt speed Range from 2 - 12 FPM
Net Weight
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
List of contents
Description Qty
Drum Sander - Pre-assembled 1
Dust Bag (273) 1
Dust Hose Collar (218) 1
Square Dust Port (56) 1
Hex Key 4mm, 5mm, 6mm 3
Double Open-End Wrench 1
Some tools may not be supplied
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Assembly
The Drum Sander.
The Drum Sander comes 95% pre-a.
assembled.
Assemble the stand.
It is easier to assemble upside down. a.
Fig. 1
b.
(263) and loosely attach (See Fig. 1)