Filter
Top Products
SKU 98198 For technical questions, please call 1-800-444-3353. Page 5
Do not use the power tool if the b.
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
Disconnect the plug from the c.
power source and/or the battery
pack from the power tool before
making any adjustments, chang-
ing accessories, or storing power
tools. Such preventive safety mea-
sures reduce the risk of starting the
power tool accidentally.
Store idle power tools out of the d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to oper-
ate the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If dam-
aged, have the power tool repaired
before use. Many accidents are
caused by poorly maintained power
tools.
Keep cutting tools sharp and f.
clean. Properly maintained cutting
tools with sharp cutting edges are
less likely to bind and are easier to
control.
Use the power tool and acces-g.
sories in accordance with these
instructions, taking into account
the working conditions and the
work to be performed. Use of the
power tool for operations different
from those intended could result in a
hazardous situation.
Service5.
Have your power tool serviced by a.
a qualied repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
Drum Sanding Operation
Safety Warnings
This power tool is intended to 1.
function as a wood sander. Read
all safety warnings, instructions, il-
lustrations and specications pro-
vided with this power tool. Failure
to follow all instructions listed below
or serious injury.
Operations such as grinding, wire 2.
brushing or polishing are not
recommended to be performed
with this power tool. Operations
for which the power tool was not
designed may create a hazard and
cause personal injury.
Do not use accessories which 3.
are not specically designed and
recommended by the tool manu-
facturer. Just because the accessory
can be attached to your power tool, it
does not assure safe operation.
Wear personal protective equip-4.
ment. Depending on application,
use face shield or safety glasses.
As appropriate, wear dust mask,
hearing protectors, gloves and
workshop apron capable of stop-
ping small abrasive or work piece
fragments. The eye protection
must be capable of stopping ying
debris generated by various opera-
tions. The dust mask or respirator