Filter
Top Products
Page 2SKU 91815
SPECIFICATIONS
Item Description
Power Requirements 115 VAC, 15 amps, 60 Hz
Power Cord Length: 43 inches; 14 AWG x 3C, 3-prong plug
Switch Type Toggle with pull-out key safety lock
Motor Capacity 1.5 HP, 5000 RPM (maximum)
Drive Type Gear drive
Saw Blade 10 inch, 36 teeth (included)
Arbor Size 5/8 inch
Cutting Angles 90 to 30 degrees (left / right) angle
0 to 60 degree (left / right) miter
Cutting Capacity 3-1/8 inches at 90 degrees;
2-1/8 inches at 45 degrees (tilt)
Rip Fence 28-1/4 (L) x 1-3/4 (W) x 2-1/2 (H) inch
Scale: 0 to 27-1/4 inches (right)
Fence-to-blade: 25-1/2 inches (maximum)
Base Dimensions 20-1/8 (L) x 22-5/8 (W) x 21-5/8 (H) inches
Table Dimensions 38-1/2 (W) x 22-1/4 (L) x 1-3/8 (H) inches
Overall Dimensions 20-1/8 (L) x 51-1/8 (W) x 38 (H) inches
Weight 165 lbs.
SAVE THIS MANUAL
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
Work Area
1. Keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.