Filter
Top Products
23
C040 Overload signal output mode
• 00 During accel/decel
• 01 During constant speed
01
C041 Overload level setting Rated current
of each inverter
C042 Frequency arrival setting for accel 0.00
C043 Arrival frequency setting for decel 0.00
C044 PID deviation level setting 3.0
C061 Electronic thermal warning level 80.
C070 Data command method
• 02 Digital operator • 03 RS485
• 04 Expansion card #1
• 05 Expansion card #2
02
C071 Communication speed selection
• 02 (Test) • 03 2400bps
• 04 4800bps • 05 9600bps
• 06 19200bps
04
C072 Node allocation 1.
C073 Communication data length selection
• 07 7-bit data • 08 8-bit data
7
C074 Communication parity selection
• 00 No parity • 01 Even parity
• 02 Odd parity
00
C075 Communication stop bit selection
• 01 1 stop bit • 02 2 stop bits
1
C078 Communication wait time 0.
C081 [O] input span calibration Factory
calibrated
C082 [OI] input span calibration
C083 [O2] input span calibration
C085 Thermistor input tuning 105.0
C086 [AM] terminal offset tuning 0.0
C087 [AMI] terminal meter tuning 80.
C088 [AMI] terminal offset tuning Factory
calibrated
C121 [O] input zero calibration
C122 [OI] input zero calibration
C123 [O2] input zero calibration
Func.
Code
Name / Description
Default Value
–FE2 / –FU2 /
–FR
Set
Value