Filter
Top Products
6
Introduction
This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures
for a JET Model 22-44 Pro Drum Sander. This manual contains instructions on installation, safety
precautions, general operating procedures, maintenance instructions and parts breakdown. This machine
has been designed and constructed to provide years of trouble free operation if used in accordance with
instructions set forth in this manual. If there are any questions or comments, please contact either your
local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site:
www.wmhtoolgroup.com.
Specifications
Model Number............................................................................................................................22-44 Pro
Stock Number................................................................................................................................ 638003
Maximum Sanding Width (in.) ...............................................................................................44 (2 passes)
Minimum Sanding Length (in.) ...........................................................................................................2-1/4
Maximum Sanding Thickness (in.)............................................................................................................4
Minimum Sanding Thickness (in.) .......................................................................................................1/32
Overall Dimensions (H x W x D)(in.)........................................................................................52 x 41 x 41
Drum Dimensions (diam. x L)(in.)..................................................................................................... 5 x 22
Drum Speed (RPM) ........................................................................................................................... 1600
Drum Bearing Diameter (in.) ....................................................................................................................1
Dust Port Diameter (in.) ...........................................................................................................................4
Minimum Dust Collection Capacity (CFM) ............................................................................................600
Conveyor Motor...................................................................... 43 in.-lbs. Torque, 1/30 HP Direct Drive DC
Conveyor Variable Feed Rate (FPM) .............................................................................................. 0 to 10
Motor........................................................................................................TEFC, 1-3/4HP, 1Ph, 110V only
Net Weight (lbs.)..................................................................................................................................350
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, WMH Tool Group reserves the right to change specifications at any time and
without prior notice, without incurring obligations.