Filter
Top Products
LevelOne Broadband Router User Guide
12
FBR-1700TX
LEDs - FBR-1700TX
Power ON - power on
OFF - no power
Status (Red) ON indicates an error condition.
Blinking - during start up, this LED will blink.
WAN: Link ON - WAN connection is established.
OFF - no WAN connection.
WAN: Act Flashing - data is being transmitted or received via the WAN port.
OFF - no data is being transferred.
LAN:
10M/Act
100M/Act
There are 7 LEDs - one for each LAN port, and each LED could be OFF,
Yellow, or Green.
• OFF - No LAN connection on this port.
• Yellow - 10BaseT connection.
• Green - 100BaseT connection.
Flashing - Each LED will flash when data is transmitted or received on the
corresponding port.
LAN:
Half/Full
Duplex
ON - indicates the LAN connection is using Full Duplex.
OFF - indicates the LAN connection (if any) is using Half Duplex.
Flashing - indicates packet collisions in Half-Duplex mode. It is normal to
have occasional collisions.
Print Error ON - Printer error detected.
OFF - No printer error detected.
Print Act OFF - no connection to printer.
ON - Connection to printer established.
Flashing - Data is being transmitted to the printer.