Filter
Top Products
LevelOne Broadband Router User Guide
76
Printer Port
This screen is available for the FBR-1401TX and FBR-1700TX only.
Normally, the settings on this screen do not need to be changed.
Figure 43: Printer Port Screen
Logical Printers
No (L1, L2, L3) Logical printer configuration is only required if using LPD printing
under Linux or Unix. Otherwise, these settings are ignored
There are 3 Logical Printers (Ports), named L1, L2, and L3.
These names can not be changed, and must be used when select-
ing the logical printer from your Unix system.
Pre-string (HEX) Enter (in HEX) the series of printer commands to be sent to the
attached printer BEFORE each print job.
Post-string (HEX) Enter (in HEX) the series of printer commands to be sent to the
attached printer AFTER each print job.
LF to CR/LF If checked, Unix-style LF (line feed) characters at the end of each
line will be converted to CR/LF (carriage return/line feed) pairs, as
used in MSDOS and Windows.