Filter
Top Products
Jointing edge
Set the fence square with the table.
Hold the best face of the workpiece
firmly against the fence throughout the
feed. (Fig.
10)
CAUTION
:
Cover the cutterhead with the safety
cover when the fence
is
pulled out. (Fig.
11).
However, never touch the safety
cover when the jointer
is
running.
Jointing warped workpieces
If
the workpiece
is
dished or warped,
press down when the workpiece moves
over the outfeed table to obtain
a
smooth surface. (Fig.
10)
Fig.
10
Using hold-downlpush blocks
For safety reasons, use hold-downlpush
Push
blocks
Fig.
12
11