Filter
Top Products
CHANGING PLANER BLADES
1.
a
Removing
blades
1
Remove the screw
of the chip cover.
cover.
on the outfeed side
Then open the chip
Fig.
1
Loosen the hex bolt with the wrench and lift
off
the safety guard assembly.
Set the depth of cut for Jointer to maximum graduation.
*Push the lock plate in the direction
of
the arrow and raise
it
slightly. Turn the
knob to lock the drum. (Fig.
16)
The drum can be locked
at
the position
shown in Fig.
17
or
Fig.
18.
Fig.
1(
Bolt Drum cover
Blade Drum
cover
Fig.
1E
Fig.
17
13