Filter
Top Products
.Take out the worn brush, insert the new
one and secure the brush holder cap.
Fig.
31
Cleaning
Always brush off dirt, chips and foreign
matter adhering to roller surfaces, motor
vents. Make sure that water or oil does not
enter the motor.
Lubrication (periodic)
Oil
the chain (after removing the chain
cover), the column moving parts (contact
areas) and the crank handle. This periodic
lubrication should be performed with
machine oil. (Oiling should be done with
tool turned off and unplugged.)
Fig.
3:
I
Remove
chain
guard
to
011
I
Fig.
33
18