Filter
Top Products
0
Lock the drum
at
the position shown in
Fig.
17
and loosen the hex bolts with the
When removina the blade from the Auto-Planer, lock the drum
at
the position shown
socket wrench. Remove the hex bolts and the drum cover.
0
Insert the blade between the drum and
the blade holder.
Set
the blade
so
that
it
will protrude by
2
mm
(5/64")
to
3
mm
(1/8")
from the drum. The holes
of the blade should be aligned with the
holes of the drum.
I
in
Fig.
18
and push the blade
the screwdriver.
Blade
Blade
holder
2mm
-
3mm
out with
Fig.
19
.When removing the blade from the
Jointer, release the drum lock and turn
the knob to the position
at
which the
blade can be pushed out with the screw-
driver.
Fig.
20
2.
Installing blades
0
Lock the drum
at
the position shown in
Fig.
18.
14